Special Commands; Pause Duration; Begin New Rule; Save Rule - Motorola Symbol MS4404 Integration Manual

13 - 8 Symbol MS4404/MS4407 Integration Guide
ADF Bar Codes (Continued)
Table 13-1
End of Message
a - z
{ - ~

Special Commands

Pause Duration

This parameter, along with
scan a two-digit number (i.e., two bar codes) from Numeric Bar Codes on page D-1 representing a 0.1 second
interval in the range of 0.1 to 9.9. For example, scan bar codes 0 and 1 to insert a 0.1 second pause; 0 and 5 to
insert a 0.5 second delay. The default is 1 second. To correct an error or change a selection, scan Cancel on
page D-3.

Begin New Rule

Scan the bar code below to start entering a new rule
.

Save Rule

Scan the bar code below to save the rule.
Parameter
Send Pause on page 13-34,
Pause Duration
Begin New Rule
Page
Number
13-102
13-102
13-106
inserts a pause in the data transmission. To set a pause,
Save Rule