Specifications - Makita AN923 Instruction Manual

ENGLISH (Original instructions)
3-1. Pneumatic tool oil
4-1. Contact arm
4-2. Nose adapter
5-1. Adjuster
6-1. Hook
9-1. Pusher
10-1. Pusher lever
10-2. Depress
10-3. Return
11-1. Nail stopper

SPECIFICATIONS

Dimensions (L X H X W)
Min. hose diameter
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Wear safety glasses.
･
Do not use on scaffoldings, ladders.
Noise
The typical A-weighted noise level determined according
to EN792:
Model AN923
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model AN943
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Explanation of general view
12-1. Air socket
12-2. Air fitting
15-1. Continuous nailing
15-2. Trigger lock
15-3. Lock lever
15-4. Intermittent nailing
16-1. Hammer
16-2. Small rod
16-3. Ejection port
16-4. Driver
Model
Air pressure
Nail Iength
Nail capacity
Net weight
) : 89 dB(A)
pA
) : 102 dB(A)
WA
) : 92 dB(A)
pA
) : 105 dB(A)
WA
AN923
64 - 74 pcs.
559 mm X 347 mm X 109 mm
END106-3
Vibration
The vibration emission value determined according to
EN792:
Model AN923
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model AN943
ENG905-1
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
4
17-1. Pliers
17-2. Slot
20-1. Trigger lock
20-2. Change lever
23-1. Drain cock
24-1. Air filter
25-1. Oiler
25-2. Pneumatic oil
0.44 - 0.83 Mpa (4.4 - 8.3 bar)
50 mm - 90 mm
60 - 84 pcs.
455 mm X 365 mm X 109 mm
8.5 mm
4.0 Kg
) : 4.0 m/s
h
2
) : 3.5 m/s
h
2
AN943
ENG904-1
2
2
ENG901-1