Honeywell GSMVLP4G Installation And Programming Manual page 6

CABLE NOTE: Two cables are supplied: a long cable and a short cable. The long cable is intended for
use with controls using firmware rev 20.xx. The short cable is intended for use with controls using
firmware rev 30.xx or higher.
GSMVLP4G Cable
Routing
(for controls with
rev 20.xx
firmware, use
long cable)
GSMVLP4G Cable
routing for modified
LYNX Plus PCB
design
(for controls with rev
30.xx firmware, use
short cable)
– 6 –