Unicast - Siemens SCALANCE XB-200 Web Based Management

– Jabbers
– Collisions
Description of the button
"Reset Counter" button
Click the "Reset Counter" to reset all counters. The counters are reset by a restart.
5.3.9

Unicast

Status of the unicast filter table
This page shows the current content of the unicast filter table. This table lists the source
addresses of unicast address frames. Entries can be made either dynamically when a node
sends a frame to a port or statically by the user setting parameters.
Figure 5-1
Description
This table contains the following columns:
● VLAN ID
Shows the VLAN ID assigned to this MAC address.
● MAC Address
Shows the MAC address of the node that the device has learned or the user has
configured.
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
VLAN-tagged packets with an incorrect CRC checksum that were discarded because
they were too long.
D etected collisions.
Unicast
Configuring with Web Based Management
5.3 The "Information" menu
65