Cisco ASA 5505 Hardware Installation Manual page 38

Product Overview
Table 3-1
Table 3-1
2, 7
3, 8
4
5
Figure 3-4
Figure 3-4
1 MGMT indicator LEDs
Table 3-2
Table 3-2
Indicator
Left side
Right side
The ASA 5510 adaptive security appliance supports only 10/100BaseTX. The ASA 5520 and the
Note
ASA 5540 support 1000BaseT.
Cisco ASA 5500 Series Hardware Installation Guide
3-4
describes the 4GE SSM LEDs.
4GE SSM LEDs for the ASA 5550
LED Color State
LINK Green Solid
Flashing
SPEED Off 10 MB
Green 100 MB
Amber 1000 MB (GigE)
POWER Green On
STATUS Green Flashing
Green Solid
Amber Solid
shows the adaptive security appliance rear panel LEDs.
Rear Panel Link and Speed Indicator LEDs
1 2
LNK SPD LNK SPD LNK SPD LNK SPD
3 2 1
lists the rear MGMT and Network interface LEDs.
Link and Speed LEDs
Color
Solid green
Green flashing
Not lit
Green
Amber
Chapter 3
Description
There is an Ethernet link.
There is Ethernet activity.
There is no network activity.
There is network activity at 100 Mbps.
There is network activity at 1000 Mbps.
The system has power.
The system is booting.
The system booted correctly.
The system diagnostics failed.
0
2 Network interface LEDs
Description
Physical link
Network activity
10 Mbps
100 Mbps
1000 Mbps
ASA 5510, ASA 5520, ASA 5540, and ASA 5550
78-17374-01