Cisco ASA 5505 Hardware Installation Manual page 16

Installation Warnings
Blank Faceplates and Cover Panels Warning
Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement
1029
Product Disposal Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
Short-Circuit Protection Warning
This product requires short-circuit (overcurrent) protection, to be provided as part of the building
Warning
installation. Install only in accordance with national and local wiring regulations. Statement 1045
Compliance with Local and National Electrical Codes Warning
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
DC Power Connection Warning
Warning After wiring the DC power supply, remove the tape from the circuit breaker switch handle and
reinstate power by moving the handle of the circuit breaker to the ON position. Statement 8
AC Power Disconnection Warning
Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units.
Statement 246
TN Power Warning
The device is designed to work with TN power systems. Statement 19
Warning
Cisco ASA 5500 Series Hardware Installation Guide
xii
About This Guide
OL-10089-01