Bulk Statistics; Configuring Communication With The Collection Server; Configuring Standard Settings - Cisco ASR 5000 Administration Manual

Bulk Statistics

This chapter provides configuration information for:
•
•
•
•
•
•

Configuring Communication with the Collection Server

Two configuration methods are available for defining how bulk statistics are collected and managed. A
"standard" configuration allows the system to automatically assign a number to the bulk statistics file.
Optionally, a number can be specified by an administrator in the optional configuration method. Command
details and descriptions of keywords and variables for commands in this chapter are located in the Bulk
Statistics Configuration Mode Commands and Bulk Statistics File Configuration Mode Commands chapters
in the Command Line Interface Reference.

Configuring Standard Settings

The configuration example in this section defines basic operation of the bulk statistics feature. Use the following
example configuration to set up the system to communicate with the statistic collection server:
configure
bulkstats mode
Configuring Communication with the Collection Server, page 157
Viewing Collected Bulk Statistics Data, page 160
Manually Gathering and Transferring Bulk Statistics, page 161
Clearing Bulk Statistics Counters and Information, page 161
Bulkstats Schema Nomenclature, page 161
Bulk Statistics Event Log Messages, page 164
schema name format format_string
sample-interval time_interval
transfer-interval xmit_time_interval
limit mem_limit
exit
bulkstats collection
end
C H A P T E R
ASR 5000 System Administration Guide, StarOS Release 21.1
11
157