Lacp_Partner_Mismatch (Id: 07700004); Lacp_Link_Speed_Mismatch (Id: 07700005) - D-Link DFL-260E Log Reference Manual

Gateway Action
Recommended Action
Revision
Parameters

2.38.4. lacp_partner_mismatch (ID: 07700004)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.38.5. lacp_link_speed_mismatch (ID: 07700005)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
exclude_link
Verify that the link is operational and connected to a properly
configured LACP system.
1
physiface
laiface
ERROR
The information exchanged with the partner system on <physiface>
does not match that of other configured Members of the <laiface>
aggregation.
LACP has successfully exchanged information on several links but
the exchanged information is not identical on all of those links. LACP
has selected the best set of those links for aggregation and the rest
have been excluded. This event is generated for each of the
excluded links.
exclude_link
Verify that all configured Member interfaces are physically
connected to the same properly configured system.
1
physiface
laiface
ERROR
<physiface> is not compatible with other Members of the <laiface>
aggregation because they are not operating at the same link speed.
All of the configured Member interfaces are not operating at the
same link speed. LACP has selected the best set of those links for
aggregation and the rest have been excluded. This event is
generated for each of the excluded links.
exclude_link
Look for hardware or configuration limitations that may be
preventing the affected link from operating at the same link speed
as the other configured Members.
1
physiface
laiface
467
Chapter 2: Log Message Reference