D-Link DFL-260E Log Reference Manual page 39

[fragid] Fragmentation ID. Valid if the IP packet is fragmented.
ipproto The IP Protocol.
ipdatalen The IP data length.
[srcport] The source port. Valid if the protocol is TCP or UDP.
[destport] The destination port. Valid if the protocol is TCP or UDP.
[tcphdrlen] The TCP header length. Valid if the protocol is TCP.
[udptotlen] The total UDP data length. Valid if the protocol is UDP.
[[tcpflag]=1] The specific TCP flag is set. Valid if the protocol is TCP. Possible values for
tcpflag: syn, rst, ack, psh, fin, urg, ece, cwr and ns.
[icmptype] The ICMP sub-protocol name. Valid if the protocol is ICMP.
[echoid] The ICMP echo ID. Valid if the protocol is ICMP and sub-protocol is echo.
[echoseq] The ICMP echo sequence number. Valid if the protocol is ICMP and
sub-protocol is echo.
[unreach] The ICMP destination unreachable code. Valid if the protocol is ICMP and
sub-protocol is destination unreachable.
[redirect] The ICMP redirect code. Valid if the protocol is ICMP and sub-protocol is
redirect.
[icmpcode] The ICMP sub-protocol code. Valid if the protocol is ICMP and sub-protocol is
not echo, destination unreachable or redirect.
Connection
Additional information about a connection. Certain parameters may or may not be included
depending on the type and status of the connection. For example, the number of bytes sent by
the originator and terminator is only included if the connection is closed.
conn The status of the connection. Possible values: open, close, closing and
unknown.
connipproto The IP protocol used in this connection.
connrecvif The name of the receive interface.
connsrcip The source IP address.
[connsrcport] The source port. Valid if the protocol is TCP or UDP.
[connsrcidt] The source ID. Valid if the protocol is not TCP or UDP.
conndestif The name of the destination interface.
conndestip The destination IP address.
[conndestport] The destination port. Valid if the protocol is TCP or UDP.
[conndestidt] The destination ID. Valid if the protocol is not TCP or UDP.
39
Chapter 1: Introduction