2.23. HWM
These log messages refer to the HWM (Hardware monitor events) category.
2.23.1. temperature_alarm (ID: 04000011)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
2.23.2. temperature_normal (ID: 04000012)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
2.23.3. voltage_alarm (ID: 04000021)
WARNING
Temperature monitor <index> (<name>) is outside the specified
limit. Current value is <current_temp> <unit>, lower limit is
<min_limit>, upper limit is <max_limit>
The unit may be overheating, this may be because the cooling is
failing or to hot enviroment.
none
Shutdown the unit and determine the problem.
1
index
name
unit
current_temp
min_limit
max_limit
WARNING
Temperature monitor <index> (<name>) is outside the specified
limit. Current value is <current_temp> <unit>, lower limit is
<min_limit>, upper limit is <max_limit>
The sensor reports that the temperature value is back in the normal
range.
None
None.
1
index
name
unit
current_temp
min_limit
max_limit
285
Chapter 2: Log Message Reference