Max_Archive_Depth_Exceeded (Id: 05800029); Unknown_Encoding (Id: 05800182) - D-Link DFL-260E Log Reference Manual

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.3.23. max_archive_depth_exceeded (ID: 05800029)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.3.24. unknown_encoding (ID: 05800182)

Default Severity
WARNING
The file <filename> has too many archive levels. Maximum allowed
is <max_depth>.
The file archive exceeds the maximum allowed depth. Since Fail
Mode is set to Deny the data transfer will be aborted in order to
protect the receiver.
block_data
Change Fail Mode parameter to Allow if files that fail decompression
should be allowed without scanning. Increase the Max. Archive
Depth parameter to allow deeper files to be scanned.
1
filename
max_depth
[layer7_srcinfo]
[layer7_dstinfo]
ALG Module Name
ALG Session ID
Connection
WARNING
The file <filename> has too many archive levels. Maximum allowed
is <max_depth>.
The file archive exceeds the maximum allowed depth. Since Fail
Mode is set to Allow the data transfer will be allowed to continue.
allow_data
Change Fail Mode parameter to Deny if files that fail decompression
should be blocked. Increase the Max. Archive Depth parameter to
allow deeper files to be scanned.
1
filename
max_depth
[layer7_srcinfo]
[layer7_dstinfo]
ALG Module Name
ALG Session ID
Connection
WARNING
180
Chapter 2: Log Message Reference