Table of Contents
Advertisement
2011-02 | Installation and User Instructions | 5 | Call Stations
17
PRS-CSNKP Numeric
Keypad
17. 1 Introduction
The PRS-CSNKP Numeric Keypad is used in
combination with a basic or remote call station. The call
station provides the microphone and press-to-talk key,
while the numeric keypad can be used for user access,
zone and zone group selection. The numeric keypad
works together with call station keypads for
pre-configured actions. The built-in LCD provides
feedback to the user.
17.2 Compatibility
The PRS-CSNKP can be used with the (new) PRS-CSR
remote call station or the PRS-CSRK remote call station
kit, but not with the (old) LBB4438/00 or LBB4439/00
remote call station (kit). It also works with the
LBB4430/00 or LBB4433/00 call station (kit).
call station or
previous keypad
figure 17. 1 : Block diagram
Bosch Security Systems | 2011-02
next keypad
LCD
Control
17.3 Controls, connectors and
indicators
17.3.1 Top view
The top of the numeric keypad (see figure 17.2) contains
the following:
1 Display - An LCD display that gives information
about user access and zone selection (see section
17.6).
2 Keys - Twelve keys to operate the (remote) call
station (see section 17.6).
figure 17.2: Top view
17.4 Bottom view
The bottom of the numeric keypad (see figure 17.3)
contains the following:
3 Keypad connector - A connector to connect the
numeric keypad to the next call station keypad for
pre-configured actions (LBB4432/00 or
LBB4434/00).
4 Keypad connector - A connector to connect the
numeric keypad to the previous keypad or to the
(remote) call station (see section 17.5).
5 Contrast control - Adjusts the contrast of the
LCD.
en | 212
1
2
Advertisement
Table of Contents
