Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 4 | Amplifiers
To jump back from a sub-menu to an item of the
main menu:
1 Turn the button to move the cursor to the main
menu item number.
2 Push the button. The item number starts blinking.
3 Turn to select another item number.
4 Push to confirm the selection.
OR
1 Turn the button to < Back.
2 Push to confirm.
To jump back from the main menu to the status
screens:
1 Jump back to the main menu.
2 Turn the button to < Back.
3 Push to confirm.
Example:
Set the output that is available on the headphones
output of the power amplifier. (This example assumes
you start from the default screen)
Power Amp 4x125W
1_2_3_4_
1 Turn to the button to go to the Menu ... in the status
screens:
Menu...
2 Push the button to confirm:
1 Monitoring
Off
3 Push the button to confirm:
1 Monitoring
1 Monitoring
Off
Off
4 Turn the button to the Monitoring option:
1 Monitoring
Off
Bosch Security Systems | 2011-02
5 Push the button to confirm:
1 Monitoring
Off
6 Turn the button to change the audio output you want
to listen to:
1 Monitoring
Output 3
7 Push the button to confirm:
1 Monitoring
Output 3
8 Turn to move the cursor to the menu number:
1 Monitoring
Output 3
9 Push the button to confirm:
1 Monitoring
Output 3
10 Turn to move to the < Back item:
< Back
11 Push the button to confirm:
Menu...
12 Turn the button to go to the default screen:
Power Amp 4x125W
1_2_3_4_
en | 148
Advertisement
Table of Contents
