Cisco ASR 5000 Series Administration Manual page 63

MME Service Configuration Procedures
Table 4. Required Information for AAA Context Configuration
Required Description
Information
MME-HSS context An identification string from 1 to 79 characters (alpha and/or numeric) by which the MME-HSS context is
name recognized by the system.
Generally it is identified as AAA context.
MME-HSS Service An identification string from 1 to 79 characters (alpha and/or numeric) by which the MME-HSS service is
name recognized by the system.
This service configured in Context configuration mode.
S6a Interface Configuration (to HSS server)
Diameter end point An identification string from 1 to 63 characters (alpha and/or numeric) by which the S6a Diameter endpoint
name configuration is recognized by the system. This is a preconfigured end-point name in Context configuration
mode.
Origin realm name An identification string between 1 through 127 characters.
The realm is the Diameter identity.
The originator‟s realm is present in all Diameter messages and is typically the company or service name.
Origin host name An identification string from 1 to 255 characters (alpha and/or numeric) by which the S6a origin host is
recognized by the system.
Origin host address The IPv4/IPv6 address of the S6a interface.
Peer name The S6a endpoint name described above.
Peer realm name The S6a origin realm name described above.
Peer address and The IPv6 address and port number of the HSS.
port number
Route-entry peer The S6a endpoint name described above.
OL-22987-01
Information Required to Configure the System as an MME ▀
Cisco ASR 5000 Series Mobility Management Entity Administration Guide ▄
63