Cisco GS7000 Installation And Operation Manual page 67

Optical Amplifier (EDFA) Modules
Optical Amplifier Module Diagram
The following block diagram shows how the optical amplifier module functions.
Optical Amplifier Operating Parameters
This section is a reference for the operating parameters of the EDFA. The EDFA is
configured through the Status Monitor/Local Control Module in the housing lid.
Refer to the GS7000 Hub/Node Status Monitor/Local Control Module Installation and
Operation Guide, part number OL-29937, for complete instructions on configuring the
EDFA.
Configurable Parameters
The following table defines the configurable parameters for the EDFA.
47