Cisco GS7000 Installation And Operation Manual page 207

EDR Transmitter Status Indicators
The transmitter module has two status indicator LEDs.
The following section describes the LED status and the correspondent indications.
The input level overdrive indicates the input signal level exceeds the limit of 35
dBmV.
For EDR 1:1 transmitter module
The following table lists the LED status and the indicated OPM, and the overdrive
status of the RF port.
LED
Power (PWR) Laser (LSR)
OFF OFF
Green Green
Orange
Green
(Solid)
Orange
Green
(Blink)
For EDR 2:1 transmitter module
The following table lists the LED status and the indicated OPM, and the overdrive
status of both RF port 1 and RF port 2.
LED
Power (PWR) Laser (LSR)
OFF OFF
Green Green
Orange
Green
(Solid)
Orange
Green
(Blink)
Orange
Green
(Blink)
OPM Module
-
Cisco Standard OPM Module
Non-Cisco Standard OPM
Module
Cisco Standard OPM Module/
Non-Cisco Standard OPM
Module
OPM Module
-
Cisco Standard OPM Module
Non-Cisco Standard OPM
Module
Cisco Standard OPM Module
Cisco Standard OPM Module
Transmitter Module Setup Procedure
Indication
Port Input Overdrive
Yes
Indication
Port 1 Input
Overdrive
-
No
No
No
Yes
-
No
No
Port 2 Input
Overdrive
-
No
No
Yes
No
187