Event Log Alpha Descriptors - Honeywell VISTA-32FBPT Installation And Setup Manual

Code Definition
607 Burglary Walk-Test
608 Off-Normal
611 Fire Walk-Test – Point Tested
612 Fire Walk-Test – Point Not Tested
621 Event Log Reset
625 Time/Date Reset
631 Exception Schedule Change
632 Access Schedule Change
912 Fire Alarm Silence

Event Log Alpha Descriptors

Alpha
Event Description
FIRE Fire Alarm
DURESS Duress Alarm
PANIC Silent or Audible Panic Alarm
BURGLARY Burglary Alarm
EXP SHRT Polling Loop Short
RF EXPND Expander Module Failure
AUXILIARY Non-burglary Alarm
TROUBLE Trouble
AC LOSS AC Loss
LOW BATTERY System Low Battery
SYSTEM RESET System Reset
PROG CHANGE Program Change
BATTERY FAIL System Battery Failure
RF SUPR RF Supervision
V-PLEX SUPR V-Plex Supervision
RF LBAT RF Low Battery
EXP TRBL Expander Module Trouble
RF TRBL RF Trouble
TAMPER Tamper
FIRE TRB Fire Trouble
FAIL TO COMM Failure to Communicate
BELL TROUBLE Bell Trouble
DISARMED Disarmed
DISARMED-REM Disarmed Remotely
DISARMED-KEY Disarmed Via RF Key
DISARM-AUTO Auto-Disarm
CALL BACK Callback Requested
CANCEL Cancel
DISRMD-EARLY Disarmed Early
DISRMD-LATE Disarmed Late
MISSED DISRM Missed Disarm
SKED CHANGE Schedule Change
ACC SKED CHG Access Control Schedule Change
ARM FAILED Failed to Arm
DIALER SHUT Dialer Shutdown
SYSTEM SHUT System Shutdown
BYPASS Bypass
NOTE: If there is a phone line (or radio) failure and the
panel has exhausted its maximum attempts to send
reporting events to the central station, the panel will
hold the messages in a buffer and resend upon restoral
of the communication path. In addition, old messages
that are sent will indicate that they are not current
messages so that the central station does not dispatch
on them. In order to accomplish this, an event qualifier
of "6" will be sent in place of the "1" or "3" character in
the message. The "6" indicates that the message is old.
Events will be sent in chronological order and will be
time-stamped in the system's event log.
Alpha
SELF TEST
TEST ENTRY
TEST EXIT
LOG OVERFLOW
LOG CLEARED
TIME SET
TIME ERROR
PROGRM ENTRY
PROGRAM EXIT
Uxxx ADD BY
Uxxx DEL BY
Uxxx CHG BY
PRINTER FAIL
PAGER FAILED
TESTED
UNTESTED
FAILED
RLY TRBL
EXP TMPR
VENT BYPASS
RF JAM
JAM RSTR
FIRE RST
DURE RST
PNC RST
BURG RST
EXP RST
RF RST
AUX RST
MED RST
TRBL RST
AC RESTORE
LOW BATT RST
RESET
PROG CHANGE
BAT TST FAIL
V-PLEX RST
86
Event Description
Self-test
Manual Test Entry
Manual Test Exit
Dialer Queue Overflow
Dialer Queue Cleared
Time Set
Time Error
Program Entry
Program Exit
User XXX Added BY
User XXX Deleted BY
User XXX Changed BY
Event Log Printer Failure
Pager Failure
Zone Tested
Zone Untested
Zone Test Failed
Relay Trouble
Expansion Module Tamper
Vent Zone Bypass
RF Jam Detected
RF Jam Restore
Fire Alarm Restore
Duress Alarm Restore
Panic Alarm Restore
Burglary Alarm Restore
Expansion Module Restore
RF Restore
Auxiliary Restore
Medical Restore
Trouble Restore
AC Restore
System Low Battery Restore
Reset
Program Change
Battery Test Failure
V-Plex Restore