Using The Keypad To Power Up The Projector - Toshiba TDP-S3 Service Manual
Hide thumbs
Also See for TDP-S3:
- User manual (66 pages) ,
- Quick start (2 pages) ,
- User manual (66 pages)
Table of Contents
Advertisement
Using the keypad to power up the projector
If you don't have a remote to start the projector with its top removed, you can use the keypad.
1
Remove the keypad from the inside of the top cover. To do this, remove the two M3x6 black
Plastite Torx screws, then lift the keypad out of the top case.
2
Plug the keypad cable into the ZIF connector on the controller ECA.
TDP-S3/TDP-T3/TDP-MT5 Service Manual
98
Advertisement
Table of Contents
Troubleshooting
