Introducing The Tdp-T3, Tdp-S3 And Tdp-Mt5 - Toshiba TDP-S3 Service Manual

Introducing the TDP-T3, TDP-S3
and TDP-MT5
The TDP-T3, the TDP-S3 and the TDP-MT5 projectors use DLP (digital light processing) technology from
Texas Instruments.
The TDP-T3 has a native XGA resolution (1,064 x 768 pixels), while the TDP-S3 has a native SVGA
resolution (800 x 600 pixels). Both the T3 and S3 have 2000 lumens (or 1600 in conservation mode). The
The TDP-T3
Part TDP-T3 part number
510-1530-xx
Controller ECA
505-1180-xx
Optical Engine
505-0976-xx
Front bezel
505-0969-xx
Front bezel vent
505-0978-xx
Lamp door
505-0966-xx
Rear bezel
505-0970-xx
Bottom case
505-0982-xx
Top case
505-1060-xx
Toshiba nameplate
020-1165-xx
Label, Certification
Power supply
329-0268-xx
insulator
Top I/O EMI gasket N/A
I/O EMI shield
N/A
gasket
TDP-S3/TDP-T3/TDP-MT5 Service Manual
TDP-MT5 is optimized for video reproduction with
848 x 480 (16:9) and 800 x 600 (4:3) resolutions.
While it has fewer lumens (1000) than the other two
projectors, it has a higher contrast ratio and better
color saturation.
Below is a table that shows the replacement part
differences among the projectors.
TDP-S3 part number
510-1579-xx
505-1181-xx
505-0976-xx
505-0969-xx
505-0978-xx
505-0966-xx
505-0970-xx
505-0982-xx
505-1060-xx
020-1271-xx
329-0268-xx
N/A
N/A
TDP-MT5 part number
510-1575-xx
505-1173-xx
505-1193-xx
505-1195-xx
505-1196-xx
505-1129-xx
505-1191-xx
505-1188-xx
505-1197-xx
020-1350-xx
329-0321-xx
505-1191-xx
329-0343-xx
7