Remove and replace the speaker assembly
The speaker assembly mounts on two posts adjacent to the controller ECA. The speaker assembly
consists of the speaker (526-0081-xx), the speaker gasket (329-0276-xx), and the speaker bracket
(340-0888-xx). Each piece is available separately.
1
Remove the following items:
Front bezel and front bezel vent (see page 13)
Focus and zoom rings (see page 11)
Top case (see page 20)
2
Use a T-10 driver to remove the M3x8 Torx screw that fastens the speaker to the chassis.
3
Move the speaker assembly aside and unplug the speaker cable from its connector on the
controller ECA.
TDP-S3/TDP-T3/TDP-MT5 Service Manual
26