Table of Contents
Advertisement
Management ACL Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
switchxxxxxx(config-macl)#
switchxxxxxx(config-macl)#
switchxxxxxx(config)#
39.4 management access-class
To restrict management connections by defining the active management access
list (ACL), use the management access-class Global Configuration mode
command. To disable management connection restrictions, use the no form of this
command.
Syntax
management access-class {console-only |
no management access-class
Parameters
•
console-only—Specifies that the device can be managed only from the
console.
•
name—Specifies the ACL name to be used. (Length: 1–32 characters)
Default Configuration
The default configuration is no management connection restrictions.
Command Mode
Global Configuration mode
Example
The following example defines an access list called mlist as the active
management access list.
switchxxxxxx(config)#
permit
exit
name
management access-class mlist
}
39
820
Advertisement
Table of Contents
