Show Parser Macro - Cisco Sx350 Cli Manual

38
813
User Guidelines
When multiple global macros are applied to a switch, the global description text is
a concatenation of texts from a number of previously applied macros.
You can verify your settings by entering the
description keyword.
Examples
switchxxxxxx(config)#

38.6 show parser macro

Use the show parser macro User EXEC mode command to display the parameters
for all configured macros or for one macro on the switch.
Syntax
show parser macro [{brief | description [interface
macro-name
}]
Parameters
•
—
brief Display the name of all macros.
•
description [interface
interfaces or if an interface is specified, display the macro descriptions for
that interface.
•
macro-name—
name
the macro name.
•
detailed—Displays information for non-present ports in addition to present
ports.
Default Configuration
Display description of all macros on present ports.
If the detailed keyword is not used, only present ports are displayed.
Command Mode
User EXEC mode
show parser macro
macro global description "set console timeout interval"
interface-id —
] Display the macro descriptions for all
Display information about a single macro identified by
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Macro Commands
command with the
interface-id |
detailed]
|
name