BE SURE TO TIGHTEN THE HEX BOLT SECURELY. Safety hints For your own safety, please refer to enclosed safety CAUTION: instructions. Use only the Makita wrench and socket wrench to install or remove the wheel. These symbols mean: Read instruction manual. Adjusting depth of cut (Fig. 5)
Then turn the machine on and wait until the maintenance or adjustment should be carried out by wheel attains full speed. Now simply move the Makita Authorized Service Center. machine forward over the workpiece surface, keeping it flat and advancing smoothly until the cutting is completed.
Gebruik voor het verwijderen of installeren van de schap te gebruiken. Vervang onmiddellijk snijschijf uitsluitend de dopsleutels van Makita. gebarsten of beschadigde schijven. 2. Gebruik uitsluitend flenzen die voor dit Installen van de snijdiepte (Fig. 5) gereedschap zijn gemaakt.
Page 7
Alvorens de machine op netstroom aan te sluiten, dienen alle reparaties, onderhoud of afstellingen te dient u altijd te controleren of de trekschakelaar worden uitgevoerd bij een erkend Makita service behoorlijk werkt en bij het loslaten naar de ‘‘OFF’’ centrum.
Page 12
Makita Corporation Anjo, Aichi, Japan Made in Japan 883307C970...