Replacing wire rope
1. Disconnect the power supply to the dryer.
2. Adjust two boards as illustrated to 555 mm
for fixation of the doors. Place them between
handle and girder B.
3. Dismount panels P in filter compartment.
4. Loosen all 6 wire clamps A.
5. Replace defective wire.
6. Secure the new wire to adjusting screw J.
7. See Adjusting wire rope earlier in this section.
8. Mount all parts and test the tumble dryer.
A
A
A
92
Sliding Door
555 mm
B
1
P
A
A
J
A
Service
manual