Motor and transmission
Fig. 1 Fan module A and Transmission module B.
The dryer has two motors, one for the fan and one for the drum.
Both motor types are protected by thermal overload relays.
If a motor overheats, the thermal overload relay is switched off and the control displays
an error code.
The overheat protection re-closes automatically when the motor cools sufficiently. The
dryer can then be re-started.
The motors are located at the back of the dryer.
Note! On electric heated dryers the internal control is protected with safety fuses. See
next page.
Before replacing the motor
It is important to compare the data sign on the new motor with the one on the old motor
regarding voltage and rpm.
Error code
The following error code is related to this section:
E05 Motor, blower (A)
E06 Motor, drum (B)
See Selecta Control Service Manual for more information.
58
Motor
1
A
Service
manual
B