Measuring, Supply Pressure - Electrolux T4900 Service Manual

Measuring tap, supply pressure
NOTE that the gas supply MUST be turned off before
loosening tap pos. 6 (SUPPLY) or gas will escape.
See the installation manual for the proper supply pressure for the
gas type being used.
1. Turn off the dryer and the manual gas valve.
2. Loosen the gas pressure tap (pos. 6) one-quarter of a turn and
connect a manometer to the tap.
3. Turn on the manual gas valve.
4. Start the dryer on High heat and check that the supply pressure is
within the allowable range.
Note! If the pressure is not within the range specified in the
installation manual,
DO NOT OPERATE THE DRYER.
Contact your gas supplier.
102
Gas system
(pos. 6)
Service
manual