Log In To The Router - NETGEAR Orbi User Manual

• If you already set up the Internet connection, enter orbilogin.com in the address field
for your browser to start the installation process.
4. Follow the onscreen instructions.
The router connects to the Internet.
5. If the browser does not display the web page, do the following:
• Make sure that the computer is connected to one of the four LAN Ethernet ports or
over WiFi to the router.
• Make sure that the router is receiving power, and that its Power LED is lit.
• Close and reopen the browser or clear the browser cache.
• Browse to orbilogin.com.
• If the computer is set to a static or fixed IP address (this setting is uncommon),
change it to obtain an IP address automatically from the router.
6. If the router does not connect to the Internet, do the following:
a. Review your settings.
Make sure that you selected the correct options and typed everything correctly.
b. Contact your ISP to verify that you are using the correct configuration information.
c. Read Chapter 10,
If problems persist, register your NETGEAR product and contact NETGEAR technical
support.

Log In to the Router

When you first connect to your router and launch a web browser, the browser automatically
displays the router's web page. If you want to view or change settings for the router, you can
use a browser to log in to the router's web page.
To log in to the router:

1. Launch a web browser from a WiFi-enabled computer or mobile device that is
connected to the network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
Orbi High-Performance AC3000 Tri-band WiFi System
Troubleshooting.
Connect to the Network and Access the Router
18