Factory Settings - NETGEAR Orbi User Manual

Factory Settings

You can return the router or the satellite to its factory settings. Use the end of a paper clip or
a similar object to press and hold the Reset button on the back of the router or satellite for at
least seven seconds. The router or satellite resets, and returns to the factory settings.
The following table shows the factory default settings for the router.
Table 4. Factory default settings for the router
Feature
Router login User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP range
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight
saving time
SNMP
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
Orbi High-Performance AC3000 Tri-band WiFi System
Supplemental Information
Default Setting
orbilogin.com
admin
password
Use default hardware address
1500
AutoSensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
192.168.1.2
192.168.1.254
Disabled
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
Disabled
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
122