Cisco 7961 User Manual page 2

Call Transfer to Another Extension
- Press Transfer soft key (caller is put on HOLD – you get Dial Tone)
- Dial Number
- Announce Call (Optional)
- Press Transfer soft key
NOTE: If an extension is busy, no answer or if you misdial, Press "EndCall" soft key,
"Resume" soft key or Line Key to return to original party
Conference Call
- Press "MORE" soft key, then the "CONFRN" soft key (caller(s) is/are put on hold – you
get dial tone)
- Dial internal or external number of consulted party (consult privately)
- When the call connects, press the "CONFRN" soft key again to conference in all parties
OR
- Press End Call, Resume soft keys to hang up with the New Caller and return to one's
original party
NOTE: Only the initiator can add parties (up to three). If the initiator disconnects from the
conference the conference remains connected, but the remaining parties cannot add more
parties.
Call Forward
- Press CFwdAll soft key
- Dial the forward to number
Cancel
- Press CFwdALL soft key
Note: You can Forward to Voicemail Direct – Press CFwdALL soft key enter 8588 or the
Messages button.
(hear two beeps)
(flashing right arrow and display confirms forwarding)
(hear one beep, display reminder off)
Page 2 of 4