Table of Contents
Advertisement
Attaching the Cable Management Brackets
The mounting brackets and cable mounting brackets are assembled together. We recommend that the
Note
brackets are installed before the chassis is installed in the Air Plenum.
To install the optional cable management brackets, perform these steps:
Step 1
Position the cable management brackets against the front of the chassis and align the four screw holes, as shown in the
figure below.
Figure 20: Cable Management Bracket (A907-CAB-BRACKET)
1
Step 2
Secure the cable management brackets with four M4 screws. The recommended maximum torque is 10 in.-lb (1.12 N-m).
Cisco ASR 907 Router Hardware Installation Guide
58
Installing the Cisco ASR 907 Router
Cable management guide
Advertisement
Table of Contents
