Using The Speaker Tracking Functionality - Cisco TelePresence MX700 Administrator's Manual

Cisco TelePresence MX700 and MX800 Administrator Guide
Contents Introduction Web interface System settings Setting passwords Appendices Appendices
Using the speaker tracking
functionality
MX700 and MX800 systems with dual camera assembly
support speaker tracking. The speaker tracking functionality
utilize the two cameras together with the built-in microphone
array to track and show the person speaking automatically.
Configuration
Use the Cameras SpeakerTrack Mode setting to enable
(Auto) or disable (Off) the speaker tracking functionality.
If set to Off speaker tracking cannot be used; if set to Auto
you can use the user interface (Touch 10) to switch the
speaker tracking on or off at any time.
Tracking mode
If you want the tracking algorithm to react faster to detected
changes, you should change the Cameras SpeakerTrack
TrackingMode from Default to Fast.
Then the camera view will change to a new speaker faster.
D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
130