Interface - GE C30 Instruction Manual

CHAPTER 3: INSTALLATION
The following figure shows configuration for the 2I and 2J fiber-laser modules.
Observing any fiber transmitter output can injure the eye.
When using a laser Interface, attenuators can be necessary to ensure that you do not exceed the
maximum optical input power to the receiver.
3.4.4 G.703 interface
3.4.4.1 Description
The following figure shows the 64K ITU G.703 co-directional interface configuration.
The G.703 module is fixed at 64 kbps. The
applicable to this module.
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL
Figure 3-27: 7x Laser fiber modules
Figure 3-28: 2I and 2J laser fiber modules
SETTINGS  PRODUCT SETUP  DIRECT I/O  DIRECT I/O DATA RATE
DIRECT INPUT AND OUTPUT COMMUNICATIONS
3
setting is not
3-27