Advertisement
MAINTENANCE
CAUTION :
Always be sure that the tool is switched off and unplugged before attempting to perform
inspection or maintenance.
same time. Use
only
identical carbon
brushes.
Replacing carbon brushes
Remove and check the carbon brushes
Limit mark
regularly. Replace when they wear down to
the limit mark. Keep the carbon brushes
clean and free to slip in the holders. Both
carbon brushes should be replaced at the
Use
a
screwdriver t o remove the brush
brushes, insert the new ones and secure
'
holder caps. Take out the worn carbon
Brush holder cap
the brush holder caps.
To maintain product SAFETY and RELlABl LITY, repairs, any other maintenance or
adjustment should be performed by Makita Authorized or Factory Service Centers,
always using Makita replacement parts.
8
Advertisement
