Makita BUC250 Instruction Manual page 6

Intended use
The tool is intended for cutting lumbers and logs.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3.0 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 1.6 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Chain Saw
Model No./ Type: BUC250
Specifications: see "SPECIFICATIONS" table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The EC-Type Examination Certificate No.3400780.01CE
The EC-Type Examination
performed by:
KEMA Quality GmbH
) : 87.3 dB(A)
pA
) : 95.3 dB(A)
WA
value (tri-axial vector
2
) : 7.0 m/s
h
2
as the responsible
per 2006/42/EC
Enderstraße 92b
ENE031-1
01277 Dresden
Germany
Identification No. 2140
ENG102-3
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes,Bucks MK15 8JD, England
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V.
ENG221-2
Measured Sound Power Level: 95.2dB (A)
Guaranteed Sound Power Level: 98.0dB (A)
sum)
ENG901-1 000230
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
Cordless Chain saw safety
ENH030-2
warnings:
1. Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw
chain is not contacting anything. A moment of
inattention while operating chain saws may cause
entanglement of your clothing or body with the
saw chain.
2. Always hold the chain saw with your right
hand on the rear handle and your left hand on
the front handle. Holding the chain saw with a
reversed hand configuration increases the risk of
personal injury and should never be done.
3. Hold the power tool by insulated gripping
surfaces only, because the saw chain may
contact hidden wiring. Saw chains contacting a
was "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
6
12.05.2010
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA010-1
GEB071-5