Advertisement
Specific Safety Rules
1. Hold tool by insulated gripping surfaces when performing an operation where
the cutting tools may contact hidden wiring or its o w n cord. Contact with
a "live" wire will make exposed metal parts of the tool "live" and shock the
operator.
Be sure no one is below when using the tool in high locations.
2.
Always be sure you have a firm footing.
3.
Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do
not leave the tool running. Operate the tool only when hand-held.
6. Do
not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
4
Advertisement
