Multi Track Recording - Yamaha Tyros5-76 Owner's Manual

4
After you finish performance, press the SONG [STOP] button to
stop recording.
A notice message appears here; press the [EXIT] button to close it.
5
Press the SONG [PLAY/PAUSE] button to play back the
recorded performance.
6
Save the recorded performance.
6-1
Press one of the SONG [I]–[IV] buttons to call up the Song Selection dis-
play.
6-2
Save the recorded data as a file by following the instructions on page 29,
steps 1–5.

Multi Track Recording

You can create a MIDI Song consisting of 16 channels by recording your performance to each channel one by one. In
recording a piano piece, for example, you can record the Right-hand part to channel 1 then record the Left-hand part to
channel 2, allowing you to create a complete piece which may be difficult to play live with both hands together. To record
a performance with Style playback, for example, record the Style playback to channels 9–16, then record melodies to
channel 1 while listening to the already recorded Style playback. In this way, you can create an entire Song which would
otherwise be difficult, or even impossible, to play live.
1
Press the SONG [REC] button and the [STOP] button simultane-
ously.
A blank Song for recording is automatically set.
2
While holding down the SONG [REC] button, press the [1 ]–
[8 ] buttons to set the desired channels to "REC."
To cancel the REC status of the channel, press the same button again.
NEXT PAGE
NOTICE
The recorded Song will be lost if
you change to another Song or
you turn the power off without
executing the save operation.
NOTE
By default, pressing the SONG [I] button
calls up the PRESET Page and pressing
one of the [II]–[IV] buttons calls up the
USER Page.
NOTE
To cancel the recording, press the
[STOP] button before going on step 4.
Tyros5 Owner's Manual
4
69