Saving The Registration Memory As A Bank File - Yamaha Tyros5-76 Owner's Manual

4
Press one of the REGISTRATION MEMORY [1]–[8] buttons to
which you wish to memorize the panel setup.
The memorized button becomes red, which indicates the number button contains
data and its number is selected.
About the lamp status
• Red: Data registered and currently selected
• Blue: Data registered but not currently selected
• Off: No data registered
5
Register various panel setups to other buttons by repeating
steps 1–4.
The registered panel setups can be recalled by simply pressing the desired number
button.

Saving the Registration Memory as a Bank file

You can save all eight registered panel setups as a single Registration Memory Bank file.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to
call up the Registration Bank Selection Display.
2
Press the [6 ] (SAVE) button to save the Bank file.
For instructions on saving, refer to page 29.
86
Tyros5 Owner's Manual
Bank 04
Bank 03
Bank 02
Bank 01
NOTICE
If you select the button whose
lamp is lit in red or blue here, the
panel setup previously memo-
rized to the button will be erased
and replaced by the new settings.
NOTE
• The panel setups registered in the
numbered buttons are preserved even
when you turn off the power. If you
want to delete all eight current panel
setups, turn the power switch on
while holding the second right-most
key (Tyros5-76: F#6, Tyros5-61: B5)
on the keyboard.
• You can also disable recall of specific
group(s) when calling up the regis-
tered panel setups: [FUNCTION] 
[E] REGIST SEQUENCE/FREEZE/
VOICE SET  TAB [][] FREEZE.
2
NOTE
Make sure that MENU 2 is shown at the
bottom right corner of the display
(page 26).