Re-Recording The Multi Track Audio File; Re-Recording A Multi Track Audio File; Normal Recording-Replacing Or Overdubbing The Entire Data - Yamaha Genos Reference Manual

Re-recording a Multi Track Audio File

Multi Track Audio data you've created can be re-recorded in the following three ways.
• Normal: Replace or Overdub the entire data ............................................................................................ See below
• Punch In/Out (*): Replace or Overdub a certain range of the data ...................................................... See
• Bounce: Merge the Main and Sub tracks to the Main track .................................................................. See
* Punch In/Out recording features three different modes depending on how you trigger recording: Manual Punch In/Out, Pedal Punch In/Out, and
Auto Punch In/Out.
NOTE
Re-recording of the data repeatedly will result in deterioration of the sound quality.
NOTICE
The data is automatically saved in the internal User drive, but you may want to back up your data before editing. Copying is the easiest way to do
this. However, since copying within a folder in the User drive is not possible, you need to create a new folder. For details on file management,
refer to the Owner's Manual.
Normal Recording—Replacing or Overdubbing the Entire Data
You can replace the entire audio data of a track by Normal recording or mix the audio data with the previous one by
Normal recording with the overdubbing enabled. Normal recording with the overdub method does not add any tracks
but simply mixes the new recording to the existing data. After stopping recording, any data following the stop point
will be erased.
NOTE
If you intend to overdub parts onto the track, it's best to keep the first recording simple. For example, you may record just a rhythm pattern (such as by playing back a Style)
or a simple bass riff over which you can add other parts.
1
To select the desired file, execute Steps 1–3 in "Selecting a Multi Track Audio File (.aud)"
on page 91.
2
Select the desired track to be re-recorded, by touching [Rec] corresponding to the track.
3
Set the recording mode.
3-1
Set the parameter "Rec Mode" to "Normal".
3-2
Set the "Overdub" checkbox off/on.
• Off: Simply replace the entire data on the track.
• On: Mix the new recording to the existing data on the track.
NEXT PAGE
94
Genos Reference Manual
page 96
page 99