Advertisement
4
Warnings Follow these
safeguards to prevent
serious injury or death.
Warnings
WARNING: Installation and servicing should be performed only by qualified
and experienced technicians to conform to all local codes and to maintain
your warranty.
WARNING: This device is configured for 12 V DC operation only. Do not
connect to a higher voltage. Use only with NRTL approved Class 2 or LPS
power supplies. To prevent potential ground loop issues, a separate PSU
should be used for each camera. A multiple-output PSU may be used if the
multiple output PSU has isolated and protected (2 A max) outputs.
Cautions
CAUTION: The light emitted from the near-infrared light emitting diodes
(LEDs) provides illumination over a wide area. This light is not considered
a risk to the unshielded human eye. However, as with any light source, it is
recommended that normal precautions be taken to avoid unnecessary
HB74H(X) Camera Quick Installation Guide
Cautions Follow these
precautions to prevent potential
injury or material damage.
800-18608 – A – 06/2014
Advertisement
