Related Manuals for Honeywell HB74H(X)
Summary of Contents for Honeywell HB74H(X)
- Page 1 Performance Series HB74H(X) True Day/Night Bullet Camera with IR LEDs Quick Installation Guide 800-18608 – A – 06/2014...
- Page 2 The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting from the use thereof. The information contained herein is subject to change without notice.
- Page 3 HB74H(X) Camera Quick Installation Guide This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. EU Conformity Statement This product and - if applicable - the supplied accessories comply with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC, the RoHS...
- Page 4 HB74H(X) Camera Quick Installation Guide Warnings Follow these Cautions Follow these safeguards to prevent precautions to prevent potential serious injury or death. injury or material damage. Warnings WARNING: Installation and servicing should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty.
- Page 5 HB74H(X) Camera Quick Installation Guide exposure. For example, avoid staring into the beam or viewing the LEDs directly with optical instruments at close range. Important Safety Instructions Read and keep these instructions. Ensure that your installation area can safely support 3 times the weight of the camera.
-
Page 6: Table Of Contents
HB74H(X) Camera Quick Installation Guide Table of Contents Introduction ................ 7 Product Features ............7 Overview ..............7 Installation ................8 Mounting the Camera on a Ceiling ........8 Power Supply ............11 800-18608 – A – 06/2014... -
Page 7: Introduction
HB74H(X) Camera Quick Installation Guide Introduction Product Features This series of camera adopts a new generation imaging sensor with high sensitivity and advanced circuit design technology. It features high resolution, low image distortion, and low noise. It is ideal for surveillance systems and image processing systems. -
Page 8: Installation
HB74H(X) Camera Quick Installation Guide Installation Before you start: • Make sure that all related equipment is powered-off during the installation. • Check that the camera specification agrees with the installation environment. • To avoid damage, ensure the power supply voltage matches your camera requirements. - Page 9 HB74H(X) Camera Quick Installation Guide Screw Hole Template Screw Hole Screw Hole Figure 1-2 HB74H(X) Mounting Template Route the cables through the cable hole and connect the corresponding power and video (BNC) cables. Secure the camera to the ceiling with the self-tapping screws (supplied).
- Page 10 HB74H(X) Camera Quick Installation Guide Adjust the surveillance angle (refer to Figure 1-4 while adjusting the angle). 1).Loosen adjusting screw No.1 to adjust the panning position [0° ~ 360°]. 2).Tighten adjusting screw No.1 when the panning position is set. 3).Loosen adjusting screw No.2 to adjust the tilting position [0° ~ 90°]. 4).Tighten adjusting screw No.2 when the tilting position is set.
-
Page 11: Power Supply
HB74H(X) Camera Quick Installation Guide Power Supply Figure 1-5 Power (12 V DC) and Video (BNC) Cable Connections Note: Please make sure that the power adapter is compatible with the camera, and the standard power supply is 12 V DC. Please refer to the camera’s technical specifications for more information. - Page 12 Document 800-18608 – Rev A – 06/2014 © 2014 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects.