Advertisement
10
5.
Adjust the surveillance angle (refer to Figure 1-4 while adjusting the
angle).
1).Loosen adjusting screw No.1 to adjust the panning position [0° ~
360°].
2).Tighten adjusting screw No.1 when the panning position is set.
3).Loosen adjusting screw No.2 to adjust the tilting position [0° ~ 90°].
4).Tighten adjusting screw No.2 when the tilting position is set.
5).Loosen adjusting screw No.3 to adjust the rotation angle [0° ~ 360°].
6).Tighten adjusting screw No.3 when the rotation position is set.
HB74H(X) Camera Quick Installation Guide
Figure 1-4 Adjusting the Angle
3
800-18608 – A – 06/2014
1
2
Advertisement
