NETGEAR AirCard 810 Quick Start Manual page 7

To power on your hotspot:
¾
Press and hold the Power button until the LCD
screen lights.
A language selection screen displays.
To select a language:
¾
1. Press the Navigation button to cycle through
the language options until your language is
highlighted.
Press the Power button to select the language.
2.
You can change the language again later from the
hotspot web page.
To recharge your battery:
¾
1. Connect the micro USB cable to your hotspot.
2. Connect the other end of the cable to the USB
port on your computer or to the USB charger.
Note:
Your battery comes partially charged.
7