Honeywell hus-nvr-1032-e User Manual page 41

Honeywell
Editing a Camera
Select a camera in the "Devices" list (Figure 5-7) and click in the bottom right corner and
the following screen is displayed. You can modify the camera's access parameters on this
screen.
Figure 5-14 Editing a Camera
If you want to set stream, PTZ and multicast, click "Advanced Settings" in the above window
and the "Advanced Settings" window is displayed as shown in the following figure:
Figure 5-15 Advanced Settings
After the settings are finished, click OK and the following pop-up window is displayed:
35