Makita PTM1000 Operator's Manual page 135

MAINTENANCE
6.2.4 R
EAR AXLE
This is a sealed single unit which does not require maintenance. It is permanently lubri-
cated and this lubricant does not need changing or topping up.
6.2.5 B
ATTERY
To ensure long life to the battery it is
essential to keep it carefully main-
tained. The machine battery must
always be charged:
– before using the machine for the
first time after purchase;
– before leaving the machine for a
prolonged period of disuse;
– before starting up the machine
after a prolonged period of disuse.
– To ensure long life to the battery it
is essential to keep it carefully
maintained. The battery on your
machine must be charged before
using for the first time and, subse-
quently, if the machine is stored,
before the next time of starting up.
– A flat battery must be recharged
as soon as possible.
IMPORTANT
must be done using a battery
charger at constant voltage. Other
recharging systems can irreversibly
damage the battery.
The machine has a connector (1) for recharging, to be connected to the corresponding
connector of the special "CB01" maintenance battery-charger supplied (
ed) or available on request (
IMPORTANT
maintenance battery-charger. For its use:
– follow the instructions given in the relative instruction booklet,
– follow the instructions given in the battery booklet.
Recharging
8.5).
This connector must only be used for connection to the CB01
37
EN
1
1
if includ-