Table of Contents
Advertisement
Plumbing
AD water connection
ö 1.5 - 10 bar (150 - 1000 kPa) over
pressure
The machine is supplied as standard
for connection to an AD water supply of
1.5 - 10 bar (150 - 1000 kPa).
^ The AD pressure tested hose
(marked "H
O pur") with a 3/4"
2
threaded union must be connected to
the on-site AD stopcock for purified
water.
If the AD water connection is not go-
ing to be used, the electronics will
need to be reprogrammed by a Miele
Service Technician. The inlet hose
will remain on the rear of the ma-
chine.
58
Hide quick links:
Advertisement
Table of Contents
