Miele G 7882 Operating Instructions Manual page 36

Warning and Safety instructions
The machine is designed for operation
with water and additive cleaning
agents only. Organic solvents must not be
used in the machine, as there is the danger
under certain circumstances of explosion.
Although this is not the case with all organic
solvents, other problems could arise with
their use, for example damage to rubber
and synthetic materials.
In critical applications where very strin-
gent requirements have to be met, it is
strongly recommended that all the relevant
factors for the process, such as cleaning
agent, quality of water etc. are discussed
with the Miele Application Technology spe-
cialists.
The mobile units and special inserts
should only be used for their specific
application. Hollow instruments must be
throughly cleaned, internally and externally.
Empty any containers or utensils be-
fore arranging them in the machine.
Do not allow any remains of acids or
solvents, and in particular hydrochloric
acid or chloride solutions to get into the
wash cabinet. Similarly avoid any materials
with a corrosive effect. The presence in
compounds of any solvents should be mini-
mal, (especially those in hazard class A1).
4
Ensure that solutions or steam contain-
ing hydrochloric acid do not come into
contact with the steel outer casing of the
machine, to avoid any corrosion damage.
Please follow the advice on installation
in these instructions and the separate
Installation Instructions.
Using accessories
Only use genuine Miele accessories
with this machine. Consult Miele on the
type and application of such equipment.
Disposal of your old machine
Before disposing of your old appliance
first make it unusable. Disconnect, cut
off the cable and any plug from the cable.
For environmental and safety reasons en-
sure the machine is completely drained of
any residue water and cleaning agent. (Ob-
serve safety regulations and wear safety
goggles and gloves). Make the door lock in-
operative, so that children cannot acciden-
tally shut themselves in. Then make appro-
priate arrangements for the safe disposal of
the machine.
The manufacturer cannot be held liable
for damage caused by non-compliance
with these Warning and Safety instruc-
tions.