Programme chart
Programme
Freely programmable
A
In accordance with general hygiene regulations. Suit-
B
able for sensitive instruments. e.g. Aluminium cas-
varioTD NR
settes.
This programme complies with the requirements of prEN
ISO 15883-1. 90 °C (+ 5 °C, - 0 °C) with 5 min holding
time.
This is a freely programmable programme.
E
For normally soiled items
(without disinfection)
UNIVERSAL
D
For rinsing heavily soiled items (e.g. for removing soiling
or disinfectant residue or to prevent soiling drying on to
PRE-RINSE
dishes when a complete programme does not yet need
to be run).
6
For draining water out of the machine, e.g. when a
programme has been interrupted. Turn the programme
DRAIN
selector to the STOP position f first!
If applicable observe regulations on containing the
spread of epidemics - see "Cancelling a programme ".
For cleaning and disinfecting heat sensitive materials at
CHEM 60°C-5'
60°C with a 5 min. temperature holding time, using a 1%
concentration of suitable disinfecting agent.
For cleaning and disinfecting heat sensitive materials at
combiCHEM
60 °C with a 5 min. temperature holding time, using a 1
60°C-5'
% concentration of suitable disinfecting agent. Cleaning
and disinfection are carried out in the same cycle.
32
When to use
Cleaning agent
(when not using liquid
cleaning agent)
Follow manufacturer's
instructions
Preferably a neutral liq-
uid cleaning agent
30 grammes in the clean-
ing agent dispenser
30 grammes in the clean-
ing agent dispenser
30 grammes in the clean-
ing agent dispenser