Honda 2003 Civic Si Owner's Manual page 59

Parking Brake
U.S. Canada
and Brake
System
Indicator
This light has two functions:
1. This indicator comes on when you
turn the ignition switch ON (II). It
is a reminder to check the parking
brake. Driving with the parking
brake not fully released can
damage the brakes and tires.
2. If the indicator remains lit after
you have fully released the
parking brake while the engine is
running, or if it comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page
See page
The left or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page
soon as possible, since other drivers
cannot see that you are signaling.
When you turn on the Hazard
Warning switch, both turn signal
lights blink. All turn signals on the
238 . outside of the vehicle should flash.
This light comes on if the hatch is
not closed tightly.
Malfunction Indicator
Lamp
236 .
Turn Signal and
Hazard Warning
Indicators
200 ). Replace the bulb as
Hatch-open Indicator
Indicator Lights
''Daytime Running
Lights'' Indicator
Canadian model only
This indicator lights when you turn
the ignition switch to ON (II) with
the headlight switch off and the
parking brake set. It should go off if
you turn on the headlights or release
the parking brake. If it comes on at
any other time, it means there is a
problem with the DRL. There may
also be a problem with the high
beam headlights.
High Beam Indicator
This light comes on with the high
beam headlights. See page
information on the headlight
controls.
On Canadian model, this indicator
comes on with reduced brightness
when the Daytime Running Lights
(DRL) are on (see page
Instruments and Controls
66 for
67 ).
59