Table of Contents
Advertisement
Lights
Replacing Rear Bulbs
1.
Open the hatch.
2.
Remove the cover from the inside
panel by carefully prying on its
upper front edge with a small flat-
tipped screwdriver.
206
Maintenance
COVER
3.
Determine which bulb, stop/
taillight, back-up light, or turn
signal is burned out. Remove the
socket for that bulb by turning
counterclockwise.
4.
Remove the socket for that bulb
by turning it one-quarter turn
counterclockwise.
5.
Remove the burned out bulb from
the socket by pushing it in and
SOCKET
turning the bulb counterclockwise
until it unlocks.
6.
Install the new bulb in the socket.
7.
Reinstall the socket in the taillight
assembly and turn it clockwise to
BULB
lock it in place.
8.
Test the lights to make sure the
new bulb is working. Reinstall the
cover over the taillight assembly.
Hide quick links:
Advertisement
Table of Contents
