Honda 2003 Civic Si Owner's Manual page 206

Replacing the High-mount Brake
Light Bulb
1. Open the hatch.
2. Put your fingers between the
interior trim and the hatch glass
on either side of the high-mount
brake light. Carefully pull down on
the trim to unsnap the clips from
the hatch. Work your way toward
each end of the trim. Remove the
trim.
BULB HOLDER
3. Remove the bulb holder from the
light assembly by pushing the tabs
on both sides and pulling the bulb
holder down.
4. Pull the bulb straight out of its
bulb holder. Push the new bulb in
until it bottoms in the bulb holder.
Maintenance
Lights
CONTINUED
207